As an Amazon Associate, I earn from qualifying purchases.
GuliKit controllers are known for their Hall-effect joysticks, low-latency performance, and advanced features such as Auto-Pilot Gaming and motion aiming support. With so many technical capabilities, users often encounter questions about configuration, firmware, compatibility, and troubleshooting.
To streamline the experience, this guide compiles the most common questions and clear, detailed answers, covering everything from joystick behavior and calibration to Bluetooth pairing, APG functionality, firmware recovery, and device compatibility across platforms.
Why does the joystick briefly move in the opposite direction after releasing it?
GuliKit controllers use a dead zone-off configuration, meaning the joystick has no center dead zone. When you push the stick fully to one side and release it, the stick naturally rebounds and overshoots the center for a millisecond before settling.
This effect is more noticeable when the controller has:
- a high polling rate, and
- high-precision Hall-effect sticks.
Controllers with built-in dead zones or lower sampling rates do not capture this rebound, so the movement does not appear in-game.
If the dead zone-off mode affects your gameplay, you may:
- Increase the center dead zone in the game’s settings, or
- Press Settings Key + Screenshot Key to enable the controller’s built-in dead zone mode.
What does it mean when the mode LED is flashing?
A flashing LED indicates low battery. Recharge the controller.
How can I wake the Nintendo Switch using the King Kong 2 controller?
After the first pairing, press the HOME button on King Kong 2 to wake the console from sleep, including when the Switch is docked.
What should I do if the button settings are incorrect?
Press Gear + “-” to restore default settings.
Alternatively, power the controller off and on again.
Why is my PC asking for a PIN when pairing?
A PIN is usually not required.
Go to: Control Panel → Hardware and Sound → Add a Device → Select the controller → Confirm without entering a code.
How can I save my customized settings?
Install the latest firmware to enable Professional Player Mode.
When the controller is on, press Gear Set + Mode to activate the mode (short vibration). Your custom settings will then be stored permanently.
Press the same combination again (long vibration) to return to regular mode, which resets all custom settings on each power cycle.
Is Auto-Pilot Gaming (APG) the same as a macro?
No. APG is significantly more advanced than traditional macros.
Key differences:
- APG records inputs from all buttons and sticks, while standard macros cannot.
- APG supports custom timing, not fixed intervals.
- APG captures up to 100 data points per second, including stick movement.
- APG logs inputs with full precision, not key-by-key.
- On KK3 MAX, APG stores up to 10 minutes or 60,000 inputs, far beyond typical macro limits.
Which PC games support motion aiming assist?
Games that use ZL/ZR for aiming and the right stick for camera—primarily FPS titles—support motion aiming. Examples include Gears 5, BIOHAZARD RE:2, and BIOHAZARD RE:3.
No additional software is needed.
Can I manually control the sticks while APG is running?
Yes. With the latest firmware, manual stick inputs always take priority. APG continues handling other recorded actions.
The controller powers on, but buttons do not respond. What should I do?
Double-click the Mode button to turn it off, then click once to turn it on again.
If the controller still does not respond, insert a pin into the reset hole on the back to restart it.
Why do the sticks drift or fail to return to center on the Switch?
How do I fix unresponsive ZR/ZL triggers?
A calibration is required.
Press L + R + D-pad Left + A together until you feel a vibration.
Do not touch the sticks during calibration.
Why does APG sometimes produce mismatched movements?
Minor Bluetooth signal loss can cause inconsistencies. If this occurs, add a short buffer action during recording (e.g., let the character stand or run in place for one extra second).
APG starts with a short delay. How do I fix this?
This is usually caused by stick drift.
Update the firmware to V2.1 or later, then perform stick calibration.
How do I test sticks and buttons?
Nintendo Switch:
Settings → Controllers and Sensors → Test Input → Calibrate Stick
PC:
Download the XINPUT Test Tool from GuliKit’s website.
Android:
Download the Gamepad Test app.
Which iOS systems support Elves controllers?
iOS 13 or newer.
Elves controllers work only with games that support Apple’s official controller protocol (e.g., Fortnite).
PUBG is not supported on iOS but works on Android using mapping tools such as Tencent Game Manager.
Why do I experience delays or incorrect movements?
Test the controller first with the Switch input tester or XINPUT on PC.
If the controller behaves correctly, the lag is caused by:
- Game settings
- Network latency
- TV processing features such as motion smoothing or compensation modes
Enable your TV’s Game Mode and disable motion compensation.
Why is there Bluetooth delay on my PC?
Possible reasons:
- Interference from Wi-Fi routers or other wireless devices
- Low-quality Bluetooth adapters relying heavily on the PC’s CPU
- Outdated or unstable drivers
GuliKit is developing a dedicated Bluetooth adapter with its own CPU to minimize latency.
Do I need to install firmware updates in order?
No. You can directly install the latest firmware.
The controller stopped working after a failed firmware update. How do I recover it?
Connect the controller to a PC with a USB cable.
Hold APG and press (or double-press) Mode until a flash drive appears.
Copy the firmware file into it to complete the recovery.
Do I need a driver to use the controller on PC?
Windows 8 or newer requires no driver.
Older versions need the official Xbox 360 controller driver.
What is DINPUT, and when should I use it?
DINPUT is an older Windows input standard.
Use it for retro games, emulators, or older PC titles.
Modern games typically require XINPUT.
How do I connect if my computer has no Bluetooth?
Use a USB-C to USB-A cable for a wired connection.
For desktop computers, use a rear USB port for best stability.
Why can’t I pair my controller with the Switch wirelessly?
Interference may prevent pairing.
To pair quickly:
- Put the Switch in pairing mode.
- Connect the controller to the dock with a USB-A to USB-C cable.
- Wait for automatic pairing.
- Disconnect the cable; the controller will stay paired wirelessly.
What is auto sleep and quick wake?
The controller enters sleep mode after 10 minutes of inactivity.
Press any ABXY button to wake it.
How do I turn the controller on or off?
- On: Single press of the Mode button
- Off: Double press of the Mode button
King Kong 2 no longer wakes the Switch. How do I fix it?
On the Switch:
System Settings → Controllers and Sensors → Disconnect Controllers → Hold X to clear all wireless pairings.
Then pair the controller again.
Why won’t my Bluetooth adapter connect to the controller?
Perform a full shutdown (not restart), then try connecting again.
If unsuccessful, update the Bluetooth adapter’s driver.
Why does copying the APG learning file fail?
The APG file must remain named Auto.apg. Do not rename it.